cube5472 , in theory, yes, but in practice there may be nuances ...: unsure:

cube5472 , I understood about the rush, there is no instruction.
Here is a post with instructionsHomtom HT37 - Firmwares (Fast kuzja25 # 67331939).
In short, the firmware for ft can also be sewed via TV.

cube5472 , maybe the instruction is also needed? :-)

cube5472 , Homtom HT37 - Firmware (Post bessarab85 # 66145898)

dermo2012 , I'll click with a fotikom and I'll drop it in PM.

dermo2012 it comes to me.
I press the button to loudly reduce, then I hold down the power button and hold both buttons until the inscription is a clamp.

dermo2012 , as in recovery, only with the button loudly reduce, instead of increase.

dermo2012 in the factory mode is not it?

Wow, not even 2 years and a stock firmware from August appeared on the site of the khomtom:
HOMTOM-P516-HT37-Android_6.0-V01-20170707.rar

Post has been editedkuzja25 - 25.12.18, 16:45

leidar1 , and tvrp on the body there?
If you just clean the cache, it seems you can do it from the stock recovery.

Dmutro Viktorovich , this is another phone - firmware will not work.

andryaka ,
Homtom HT37 - Firmwares (Fast kuzja25 # 67331939)



Post has been editedkuzja25 - 22.10.18, 19:49

(Anuta) , I do not advise buying the ht37pro version, although it is better by its characteristics. Android 7 is of course also better than 6, but all the advantages are insignificant and are not worth the risk of getting a marriage directly from the store - for the last few months there have been at least 4 of these.

The screen, as I understand it, is the same in the normal version and in pro.

Post has been editedkuzja25 - 11.10.18, 16:23

(Anuta) if you compare and choose between xt16 and xt37, then definitely it’s worth taking xt37.
Xt16 can be damaged from any sneeze - problem iron.
Ht37 with custom firmware is not very good friends, but on the stock Android 6 everything seems to be normal for the absolute majority of owners. There are stereo speakers - a big plus when watching a video, the camera flash is weak, the finger scanner works fast ...



Post has been editedkuzja25 - 11.10.18, 13:45

makc2364 Try to switch the speed to full speed in the settings.

makc2364 You have an emergency port.
Must be such a "Preloader USB VCOM Port" or "MediaTek PreLoader USB VCOM".
You do not have "PRELOADER, but" DA.
It is necessary to call the test point with the buttons. Shay without battery.
First you need to flash only the preloader. Try to hold loud + before connecting the cable.
And look at the lower right in the status bar which port is open.
If loud + does not work, then try power and loud +.
If the preloader is sewn and there will be a normal port without pinching the buttons, then I can sew the whole one.
First try download only.
the main thing is not to do format all.

Post has been editedkuzja25 - 12.09.18, 21:36

makc2364
errors SP Flash Tool - flash driver for smart phones based on MTK.
tried it?


1. opens VCOM port?
2. stitching without disconnecting the battery?
3. at what stage does the error pop up?
4. show screen ft with an error

Post has been editedkuzja25 - 12.09.18, 20:34

jolik What firmware did you sew?

All flashing firmware from August here from this post
Homtom HT37 - Firmware (Post bessarab85 # 66145898)
no one after that complained of viruses and I did not see them myself.

If you run in the format all mode, then the section in which you have other data will be lost.
Well, if the format and firmware of the preloader, bootloader or kernel fails, then you can get experience in rebuilding bricks.

When you have a working phone in your hands, you do not need to format all partitions (format all), you do not need to upgrade firmware (it includes the format of partitions).
You just need to flash / replace in the Download ONLY mode the system and recovery sections.

Post has been editedkuzja25 - 10.09.18, 12:42

setup722 , there are already instructions on how to install firmware via TVRP: HOMTOM HT37 - Discussion


Post has been editedkuzja25 - 05.09.18, 14:44

setup722 ,
I did not seem to write instructions for installing custom: unsure: :-)

Vladlo7 What instructions did you use to cast?

Post has been editedkuzja25 - 05.09.18, 14:35