Rep: (452)
* wild_lumia
Well, not seen, so she died
hw storage NONE



Rep: (452)
Memory emmc is the same flash "ordered to live long" as an option

Post has been editedWErt (WErt) - 14.02.19, 12:46



Rep: (452)
* Venders.,
It will be like this. Until the flashlight starts to sew, it will connect and disconnect



Rep: (452)
Not a format!
Sew only one preloader. To sort out what is sewn up. With the volume button held down + or -. Then the rest.



Rep: (452)
Stoke recovery, most likely no longer, just tried.
Flashlight in hand and forward in accordance with the firmware version



Rep: (452)
Well, who tried the 6 android from Homtom ht7 pro set ??????

This is nonsense and brick restoration problems as a result.



Rep: (452)
* Adeloff,
Judging by the board in the name of the firmware should be V9, but these were not here. Write to hamsters in support (in English), they have contacts on the site and they respond (not quickly).

Post has been editedWErt (WErt) - 07.03.18, 07:42



Rep: (452)
* vatmann,
What data is needed from the backup?
Memory test on this phone says
EMMC_PART_USER Size = 0x00000001d3000000 (7472MB)

Post has been editedWErt (WErt) - 01.03.18, 00:09



Rep: (452)
I wrote that the full fusion with the scatter of the previous version is filled with the norm

About the preloader there is another region and it is necessary to rihanut before pouring it.
So read not carefully

Post has been editedWErt (WErt) - 09.02.18, 20:38



Rep: (452)
how to remove preloader? is there an instruction?

Cap, instructions, full, there in spoilers



Rep: (452)
* kotofotgmail,
Full then full, and preloder separately. Give a full and boot partition, make firmware for the flashlight and twrp

Post has been editedWErt (WErt) - 09.02.18, 00:27



Rep: (452)
* kotofotgmail,
It was not like that yet. Backup should be done before the firmware, if you know that there is no such



Rep: (452)
* Koma.N,
You probably have the latest version for hardware revision V5. New for her was not. If you need problems, then with firmware V7, V8 they get 100 percent

Post has been editedWErt (WErt) - 27.01.18, 21:21



Rep: (452)
Continued with the blade of the wheelbarrow, the second series.
Write to the manufacturer



Rep: (452)
* Ray192,
Good to clarify. It was previously written that the touch did not work only in TWRP. Now it seems that it does not work everywhere and in the usual system too.
If it doesn’t work everywhere, then all your formats are messless, etc.



Rep: (452)
* das8das
Then in boot.img from cubot you need to change the kernel to your own. And flash boot cubot with its own kernel. So it will be right. This is all written in early green text in the post twrp. There may be some important initialization in their buta. How? We read the forums and do. Or sew your own firmware and do not fool around.
I warned that there is no guarantee of proper operation when replacing the boot (according to the rules, the kernel must be changed, but everyone is lazy and no one is doing this). No more commenting here

Post has been editedWErt (WErt) - 12.01.18, 07:36



Rep: (452)
* das8das
No difference.
For good, you need to change the core in the boot from the cubot. May not make money on stock bute



Rep: (452)
* Ray192,
Eyes wipe and see.
V8-V1.0.2 firmware.
There is no such hat.
Make a backup through the flashlight.
You probably already have the wrong recovery

Post has been editedWErt (WErt) - 09.01.18, 09:40



Rep: (452)
* amadeus6821,
In a post with twrp read the green text



Rep: (452)
* amadeus6821,
Understood nothing. So is there a firmware on the phone or is it already gone and only twrp is left?
If so, ask someone to back up the firmware. Or flash the boot.img and system.img yourself from the flashlight firmware. How? We are looking for here.
If the firmware is there and it works, but you want something else, then it is better not to do it (for this version of the firmware there are no ready for twrp).
PS: I haven’t and never had this phone, I can’t really help anything.

Post has been editedWErt (WErt) - 08.01.18, 12:04

Full version

Help     rules

Now: 07/26/19, 13:29