White screen...
version guglpley ...
and redmik 2 and Maisie m3s ...
feeling that the application can not access the yusb chamber, and the request does not give ...
can anyone knows how to solve?

I would look at what is wrong, but how much did not try phones (HTC / Xiaomi / Lenovo) I have everything working ...
It would be good if someone recorded the log via adb (logcat) when the program starts at whom it does not work.

Bought Alik izikap device, in a set of wire, disk, manual, version no.
Download the application of a cap plate snow leopard, connect Isik, the green LED lights up, the current it is, but the app says "device not found"
Isik connecting to the Note, the usual "install driver" does not happen, just Gorid diode Easy green, and everything still noutu
What am I doing wrong?

boomer509,
As far as I know, these izikapy made on a pile of different chips.
Name izikap used for sales.
You need to know what kind of chip is worth in your (maybe have to reveal), and google the chip is likely to find the right driver / software.

luminary6 As well as a software driver in the tablet can be placed? I watch the video on the quarterdeck, where people once all the works, just download the app
Right now, the seller wrote, if there is support for android in it

boomer509, Device support in Android systems is based on the list of supported Linux kernel equipment (on which Android is based).
The list of supported hardware depends on the version of the Linux kernel and the hardware platform (from how the Linux kernel moved to a specific platform, and whether the manufacturer of this hardware platform has provided support for all devices in the Linux kernel .. (and also a lot of nuances ..))
In short, modern devices must support everything at once, because Linux there are fresh and the main Linux drivers are transferred to mobile platforms.

Old devices may not work for 2m reasons:
1. No hardware support for external USB devices (USB-OTG mode).
2. Lack of standard modules (drivers) Linux kernels in the same version of the kernel installed the device manufacturer in the device.

What can be done?
1) Check whether the USB-OTG flash drive opens (with FAT32 file system).
If yes, there is a hardware support.
2) Check the camera via USB-OTG.
If it does not work can be:
1. Bad cables, you need to replace shorten, etc. (OTG a very gentle decision, may not work on long or bad cables)
2. Old Android, see the description of this program on which version of the OS it works.
3. Maybe there are no necessary modules in the Linux core in the firmware of the device. What to do? Sake for the latest official version if there is. Sake a cast found on this site. To correct the firmware, inserting the nuclei modules from a similar device. And the last option is to compile the Linux core for your device and collect all the necessary modules for the device (in fact do your firmware, if someone has not done it before you, it is extremely difficult and time, if no one has done it, then then then then then then then not worth the result. It is easier to buy a new device)

Post has been editedluminary6 - 08.04.20, 00:21

OTG on the tablet works, reads, writes external USB Flash.


1) FPViewer_v1.3.3.apk - Wants a Google account and Internet, and there are no on the tablet.
2) FPViewer-V1.3.3-Noad-v0.1.apk starts, without a USB camera gives inscription disconnected
With a connected camera - Connected, but the screen is still white and no images.
USB videoscop / endoscop camera for Android. Checked it on Windows - gives an image.

I tried another GO-FPV and others. Similar to work with endoscopes, microscopes - do not work.

Please tell me, UVC is an app preparation support for analog inputs in the tablet + program support (drivers) or hardware support all models?

How to check if the UVC tablet support? (Android 8)

Posted 03.06.2020, 21:28:



Is there a list of devices, obviously supporting OTG and UVC?

Nastrer,
Android 8 is a modern device must support.
Try other programs.

Perhaps everyone who speaks about the white screen does not have the Internet or their google services are cut out, I can't say anything else.
Try to start the Internet to check and run different programs.
How to connect the tablet to the Internet - options mass, but often need a router or computer or additional. device.
More can be searching in the network.

Please tell me the Digma Linx X1 Pro 3G (//savagemessiahzine.com.to/forum/index.php? Showtopic = 946658 & ST = 40) Works with this program?

That is, if the Internet is currently not available, the program will not start and the user is always hostage?

There is a special application, I will try to lay out it.

TestUVC_0.5.apk(2.18 MB)


If there is no support, only the tablet change is not treated differently.

On both of my tablets there are support, android 8 and 9.
Everything works, but there is no premium on the downloaded version from here.
I tried LP - it does not work.

Type of: Modification
Version: 1.3.3
Short description: Light Premium mod

• ReceivedPREMIUM
  
• Removed ads
  
• Removed analytics

Yes, I decided only to buy in the play markete))

I do not know, I, for example, works. But, there is one thing - there is no sound. Served from a digital tuner of the essential TV. Phone Nokia 2.1, 9 Android, Espada EusbrCA63 converter chipset AMT630A. It didn't go immediately, I tried several programs, all the same, blue screen, occasionally part of the gray piece made his way, which gave hope. I finally won, when suddenly realized that the tulips I had out of the tuner, and the signal tried to get from the entrance of TV. And this happens in life. Changed, immediately started.
Tookhere

Still working programs
FPVDroid FPV -link

Dronevr.link

Hello bought a Skydroid Fuav FPV OTG 5.8G receiver for connecting to Vision Itel L6005 Android 9 with OTG. downloaded the GO FPV program writes there is no driver, with the FPVLIEWER program there are 5 seconds ... 10 and hangs like a foot frame. I did not help different drivers from the playmarket how to debug it help

Android 10 devices do not support UVC (USB Video Class) devices
This is true? I can’t make an endoscope with Honor 9s by the USB ...

Fedos868 , I work on android 10 has work

By error, they indicated or in the application for drones is it possible to look from the external wired camera? Not found