Level of difficulty:for beginners. Almost all modern Android devices have the ability to automatically adjust brightness. However, this function does not always work reliably, which leads to the installation of irregular highlighting values ​​with a sharp change in illumination. Therefore, many users still prefer to use manual brightness adjustment. In this article you will learn how to do this in the most convenient way. The standard procedure for changing brightness implies that you must open the curtain with switches, slip along the brightness tile, and then move the slider in the emerging pop -up window.
Such a chain of actions to many users seemed too slow and uncomfortable, so in some alternative firmware a more comfortable way appeared. It consists in a simple swipe with a finger along the upper boundary of the screen (along the state line). However, there are several ways to use this method on the stock version of Android.
пїЅ
XPOSED + GRAVITY BOX
This is not the first time we have been referring to the description of the functions of this wonderful project and we will do this further, because the capabilities of the Xposed Framework are very extensive.
First of all, you need to take care of the availability superuser . One of the ways to get Root you can find in this article . After that, you need to install the Xposed Framework program, which is used as an environment of performing modules specially written for it. More detailed information and step -by -step installation process, which, incidentally, has its own nuances, you will learn from our recent leadership .
So, after you installed the XPOSED and rebooted the device, you need to download the multifunctional GravityBox module. This module has the extremely wide opportunities that we wrote in this material . Among dozens of useful functions GravityBox there is also a brightness adjustment to the status line.
To activate it, open the main window of the program and find the section "Status Straws". In this section, it is necessary to put the flag near the option “Turn on brightness control”. Please note that this function will only work with the auto -firing disabled.
пїЅ
Adjust screen brightness
The main function of this small program is clearly declared in the name. Its main advantage over the method described above is that for it It is not required to ruin its device and install any additional software, except, in fact, the utility itself.
In the utility settings, you can set the position of the brightness adjustment slider, its size, color and transparency. A little experimenting with the settings can easily achieve exactly the same effect as with Gravitybox. That is, the brightness regulator will be located along the upper boundary of the screen and is completely invisible, and the light touch of the finger will cause its appearance and a change in the level of the screen of the screen. Do not forget to only note the option of auto -loading of the program so that with each reloading of the device you do not have to run it manually.
Of course, alternative options for adjusting brightness in the Android operating system described in this article are not limited. We hope that you will tell the most convenient of them in the comments.
Adjust screen brightness
RubberBigPepper
Already downloaded: 5603 users
A source:
XPOSED drags
A-TAR,
Those who do not fumble;)
Everything is easy and simple in the tachviz)!
Greno4ka,
Hush, right now Samsungonenavits will fly like crazy vultures overwhelming rottens;)
@llexander,
And in the castes there is a function: "Brightness Control" in the STATUS BAR section. In general, when you run a finger with a finger on the status of the bar.
Marambola,
The best curtain from Jos.
Cfg +,
It is best to write in the topic, not spitting about everything
mitligin,
That's it. If you know, but in Google there are curtains from Jos. They are incredibly convenient.
Cfg +,
So rightly incredible?)) Similar to innovations from such epithets ...
Chngz
Well, I used such a curtain, it was convenient on a small ACE + ..
Cfg +,
Yeah. Especially when you consider that in many Androids, for example, in Samsungs this appeared long before the "IOS".
Cfg +,
Better curtain from Lollipop.
Razoblachitel
I completely agree ))
Marambola,
Yes, yes, turned on almost immediately :)
@llexander,
It is not always possible to buy samsung, for example, there is simply no Samsung in car radiols. So you have to go out)
A-TAR,
I have a 2.2 program with this function on Aedri.
A-TAR,
What is the point? In the curtain, adjustment ...
On Meizu smartphones, it is very convenient to adjust brightness.
Kaisaschnitt, lol on everyone the same, through the curtain.
SleepyMan,
I want a tube option, through a flat steeple with teeth somewhere on the side or in the corner of the smart.
Sorry XPOSED has not yet been timid on Art
On Samsung smartphones you just need to open the curtain and already adjust the brightness there.
KodIHTIK,
and what??? And this is only in the SGS ???? In LG G2-G3, the same on HTC too ... and believe in many
Amil..86,
And what? LG learned to lick the interface from Samsung well, so they go by, and HTC did not use, so I will assume that you did not lie to them.
Cool .... but this is superfluous, the swipe from the top down and looting, there is also a brightness adjustment, without loading the smart with additional dubious software;)
@llexander,
So there are smarts where first notifications in the curtain, then you need to switch to the switches themselves and there also choose a brightness adjustment
v1ktoor,
Duc on these smarts and so in memory, especially loading them with all kinds of left software)))
@llexander,
On my Moto X is that. But even this is not a problem- it is the tab with the settings that is pulled out by the swipe with two fingers. Memory back? Oh yes, where are I from 2GB of 1.2 are free, it is not SameSung, who put it almost completely 3GB with their curved whistles, peremels, score another 3-5MB and display a settings panel, at least a whole settings screen, yes Also, to choose, with setting and position, and color, and appearance, you can put in the curtain.
You can continue to admire the samesung crooked divisions, justifying the curve of software with the inability to go to the market, download and install programs.
Not for you, Samsung already shortened everything as best he could. Softinka- Power Toggles.
moto e,
Great comment!
moto e,
You are so blinding with your bile that you don’t even really read other people's comments, I spoke about smartha with a small volume of operations 512 MB, as if they were oversized)))
It is so convenient, with two fingers! And how do you turn on 3g, mobile Internet? With three fingers? Google took care of convenience, or Motorola?
Slovelissimo,
Slovelissimo,
Google gave the skeleton, I threw the meat myself, and the one that I think is fresh, and not the one that is undermined to me without options.
All this is data transfer, network type, backlight adjustment, screen rotation, GPS, battery charge on the desktop, I don’t go to the curtain at all, and the notification panel is free for notifications, and not pledged with switches. And without root, without interference in the framework. One small program.
@llexander,
Not all such smarts have little memory. A striking example of this - Sony Xperia Z Ultra (A4.4.4), the first swipe from top to bottom opens, you need to switch to the settings (you can draw with two fingers, then the settings will immediately open, but it does not go out with me with one hand), poke it in the settings On "brightness". In the window that opens, there will be a slider with adjustment.
W1Nterfell,
You can quickly swap down the curtain twice with your finger, if in the right hand. The settings menu will open.
I will probably install it myself
(Comment has been deleted)
Miui is easy and simple. Immediately in the curtain of the slider.
urrk,
And at the same time, there you can immediately turn on the auto -yardness
(S.T.R.E.L.O.K.),
In the hated by all Touchwiz the same
5.0 is convenient in the curtain
Screen Dim is better to use it, this program can be configured for yourself. Need a min. The backlight is one meaning, a little slightly brighter is a different meaning and so on.
Plus, the threshold tunes both contrast and brightness.
In my opinion, while you configure, it’s easier to use the regular adjustment
GLEB PAVLOFF,
This is if there is a regular one, I have no volume control in X -spur in the curtain.
For the curtain, I use Brightness Rockker (I advise everyone who does not have a standard brightness adjustment in the curtain) and Schindim for use in the evening or at night. In addition, on some phones, for example, on mine, the minimum brightness is too blinded by her eyes, so Schindim for such an indispensable program.
Instead of Schindim (and in addition to it, too), you can use the SCREEN FILTER HEADSEDED. Coin is also a good thing.
Thus, you can score the curtain with brightness adjustments:
1 - Brightness Rockker, if there is no standard adjustment in the curtain
2 - Schindim, for adjustment on pre -prepared profiles (especially when you need brightness below the system)
3 - SCREEN FILTER HISSPOSED module, when you need to smoothly adjust the brightness in the curtain (there is also a brightness below the system).
He told everything that he knew. Thank you for your attention.
nirrovinger,
I confirm. I use the "Screen Filter" from google. No rights of a super user.
Meh
Oh yes, a great program.
Is it possible to give a link to the application immediately in the article ... for example:
"After that, you need to install the program / url / ........ / name / xposed framework \ name \\ url \"
Otherwise I never found it in the market ...
We are waiting for the article: - "How to configure the volume android", "how to turn off the data transmission" and the final article will "how to enable and turn off the siartphone for android"
I don’t understand what the joke is, on Moto X, the sensation is always worked out in the framework of decency, an article for the owners of Galaxy Ace :)))
Dark_Hamster,
We have already written above, I repeat, the minimum brightness is very high, it cuts the eyes in the dark, apparently struggle with the shim of the backlight or based on the fact that if the minimum brightness is closed, then nothing will be visible in the light, an awkward situation :)
Dark_Hamster,
On my Fly IQ4403, the sensor is glittered. And there are thousands of them. If you are working out everything, this does not mean that everyone has it.
Give me a rally not in markets from there I did not find anything
"OT" - a general theory of relativity? If so, then you need to write in capital letters: OT.
Honestly, it is not clear why masculine and what she does "in markets."
I have brightness at a minimum, only with a bright sun you need to use an increase in brightness, but for this it is very conveniently done in the curtain
It is cool that in the cyan you can adjust brightness on a long tap on the status of a bar
I use the "Screen Filter" from google. No rights of a super user.
Daytime settings arrange me, but the minimum wage, if at night at navigation outside the city, is too bright. This program decides it with a bang. And you can solve her to solve your problems.
RubberbigPepper cool !!! By the way, he is a Russian developer, and sits on 4pda.
Andryshik345,
Yes, he is cool and his programs are super.
What a nafig curtain, in order to get to it, you must still unlock the device, then open the curtain, then adjust it, for a long time it is all. The brightness of the screen and less trouble)
Why such difficulties, for a long time in the curtain there is a brightness adjustment. In any case, at the Samsungs, he lowered the curtain and adjusted the brightness, or put a box on auto -firing. It is not necessary to put any additional programs.
It is better to write how to set the level of the minimum minimum, given by the system, otherwise on some devices it is too bright.
webknuty,
Who prevents you from putting the SCREEN FILTER module or Schendim?
In the commentary, it is already described to the details of what and how.
webknuty,
Screen filter
webknuty,
The brightness of the screen is to help you, better than the "Xposed -Screen Filter" module.
Gravitybox is not only not only bright ..
Setting without firmware almost all
Vent88, where to find this box? (Not in the market)
In the same Gravitybox in the screen settings, you can configure auto -firing levels. Before the XPOSED and the current smart, it was very useful for a furious sensor, which was underway on the street, and blinded in the dark
Having climbed the articles, I found a description about the fan menu - I turn on the option how much I didn’t drive it - it doesn’t work, I rummaged in the settings again, and it earned a miracle!
And if you set the action in it for example on the “back” button - turn on the flashlight, then on the usual back button when holding it - I have a “screen lock”, this way the functionality expansion per button is very practical.
And on my one+one everything is fine and so tunes and works correctly
I twist the brightness to the maximum and everything suits me.
Cynvox,
I have it on auto -firing and also suits everything.
Fine.
Now I know everything ...
Curtains, some kind of programs. And auto-yanging is normal not fate to cut it?) I already noticed that there is always some kind of trouble with her on androids.
Who knows if there is a module for the Xposed Framework that allows you to remove the device from the dabble sleep mode on the screen? As, for example, HTC One M8/LG G3/Meizu MX*, etc.
Great thing! I used it on ZTE Blade, this function was built into the firmware of cyan. Now I have the G700 and it also works
My brand Samsung took care of the poor slave to change the light of the screen.
Everything is clear and clear. In addition, Ruth is not required.
He did not mention the negative brightness in the article .. Cussessively installed this one 5 times less and more convenient than the previous screen filter.
EGL^ minus only that the strip in the shades of the gray) cannot be installed .. well, the advertisement is incredible. Otherwise, plus.